info@kitautomazioni.com - Tel. 353 4419493 also WhatsApp
info@kitautomazioni.com - Tel. 353 4419493 also WhatsApp
Developed at the request of other companies in the automotive sector, MY CABLE TESTER 24-24 is able to carry out accurate and fast checks on 24 connection lines. It uses 2 ports of 24 poles each and is able to automatically detect the connections of the first reference wiring that is presented to him as "OK wiring".
Just insert the following wiring to MY CABLE TESTER 24-24 and he, in a few seconds, will check all possible combinations of connection providing a result of wiring OK (green color) or faulty wiring (red color).
The warranty covers any malfunction caused by manufacturing defects or defects for a period of 12 months. The warranty does not cover damage resulting from tampering, use of power supply other than that provided, input of power supplied from outside on the test doors, infiltration of liquids or foreign matter to the device, damage resulting from excessive external heat sources.
That’s not all. MY CABLE TESTER 24-24 allows you to save in a folder of your PC multiple OK wiring files already detected, in this way, at any time, you can change the type of wiring to test by simply selecting the specific file already saved on your PC (on the occasion of the first automatic acquisition of that wiring).
The graphical interface also returns a diagram of how the connections of the 24 pins of port A with the 24 pins of port B are connected (all possible combinations). Through adapters to be prepared for each different type of wiring to be tested, you can check all the wiring of your production.
MY CABLE TESTER 24-24 is composed of an internal electronics that contains all the components for the control of the connections and an Arduino 2 board, the power supply is via simple external power supply for 230V socket, there is a USB port for connection to the PC. The wiring test current is about 300but you can require hardware and software changes to manage (within certain limits) different currents.
MY CABLE TESTER 24-24 reduces to zero the problems of malfunction (and related damage) caused by wiring that has no connections or incorrect connections. Think about how many problems and costs can arise from the delivery to the customer (whether it is an end customer or a third party) of a wiring harness or a complete device, where the connections are wrong! In the best case, the system will not work and you will have to bear the costs of service and replacement. In the worst case, there may be damage resulting from incorrect wiring connection with even possible legal action to be taken.
Manual controls made with testers or simple connectors with LEDs or bulbs can be good for very simple wiring with a few connections and are still susceptible to human error. Manually check wiring harnesses with 10-20-30 articulated connections with high reliability is generally impractical! MY CABLE TESTER 24-24 can control all connections in seconds with time savings, maximum control reliability, maximum customer satisfaction in the short term, maximum company satisfaction rating in the medium and long term!
- Companies that produce audio cabling
- Companies that produce video cabling
- Companies dealing with automotive wiring production
- Companies dealing with PCB production
- Companies involved in manufacturing CNC machine wiring harnesses
- Companies involved in the production of electrical panels
- HO-RE-CA machine cabling companies
- Companies involved in electronic prototyping
- Any other company that produces its own or uses third party cabling
- Compact housing with 2 24-pin connectors
- Automatic connection detection
- Saving connections on a PC
- Recall cabling files already acquired from PC folders
- Automatic wiring control to test (green OK, red WRONG)
- Graphical display on PC of the connection scheme port A and port B
- USB port for PC connection
- 12V DC power supply socket
- Power supply for 230V socket included in the kit
- Test current lines 300ma
Adapters for MY CABLE TESTER 24-24 must be made according to the type of wiring to be tested. The device has 2 ports of 24 poles each, can then control parallel simple wiring (extension type) up to a maximum of 24 wires, or test complex wiring made up of multiple connectors with series connections-parallel, all up to a maximum of 24 connections. To test even more complex wiring, it is possible to make 2 or more adapters and perform the test in 2 or more phases, always with a maximum of 24 connection controls for each phase.
Port A: in this case, it will be enough to create an adapter that has the connector complementary to the one on one of the sides of the wiring.
Port B: it will be enough to create an adapter that has the connector complementary to the one on the opposite side of the wiring.
Port A: in this case, it will be enough to create an adapter that has the single connector complementary to the one on the wiring.
Port B: create an adapter that has 1 complementary connector for each of those on the opposite side of the wiring.
Port A: create an adapter that has 1 complementary connector for each of those on 1 side of the wiring.
Port B: create an adapter that has 1 complementary connector for each of those on the opposite side of the wiring.
Port A: in this case, it will be enough to create an adapter that has the connector complementary to the one on one of the sides of the wiring.
Port B: it will be enough to create an adapter that has the connector complementary to the one on the opposite side of the wiring.
To speed up wiring control, you can create a multiple adapter that allows multiple wiring to be tested in parallel.
For example, to test simple 3-pole and 3-wire wiring (for example, current or signal extensions) you can create an adapter that can test 8 wiring at a time. Another example, to test wiring harnesses with various extension connectors that have a total of 6 wires, you can make an adapter for the simultaneous test of 4 wiring harnesses.
The electronic cable-head MY CABLE TESTER 24- 24 has a sequential control of 24 lines, it is possible to exploit them all by creating multiple adapters to speed up the control process of many wiring; In case any of these is faulty, MY CABLE TESTER 24-24will signal with red screen a problem.
In the era of automation and technological advancement in the field of electronics, the importance of automatic testing of wiring within companies producing electronic systems and wiring has become absolutely crucial to ensure the highest quality, the reliability and efficiency of the products. The market entry of the MY CABLE TESTER 24-24 device, with its ability to interface with a PC via the USB connection, has effectively inaugurated a new paradigm in the field of control of precise connections within the wiring, greatly reducing the risks associated with potential damage, time-wasting and costly requests for technical assistance.
In the constantly changing industrial landscape, the production of sophisticated electronic devices is accompanied by a growing need for complex and optimally designed wiring. Even the slightest error in a connection could trigger malfunctions, interruptions in functions and, in severe cases, chain failures. And it is in this scenario that manifests in all its relevance the automatic testing of wiring. As the complexity of electronic systems increases, manual verification becomes increasingly ineffective and potentially subject to human error.
It marks a turning point in wiring testing. This compact and revolutionary tool establishes a direct connection with the PC through the USB connection, thus facilitating the accurate and timely verification of connections within the wiring harnesses also returning images of missing connections or incorrect connections. Thanks to its state-of-the-art technology, it is able to detect even the smallest defects or polarity errors in wiring, significantly contributing to the reduction of the risk of production of defective components.
Port A: create an adapter that has 1 complementary connector for each of those on 1 side of the wiring.Port B: create an adapter that has 1 complementary connector for each of those on the opposite side of the wiring.
The MY CABLE TESTER 24-24 device ensures that every single cabling meets stringent quality standards. This results in greater reliability of the final products and, consequently, greater customer satisfaction.i.
The ability to detect defects in wiring even before they reach the final production stage drastically reduces the likelihood of generating costly waste and having to deal with costly product revisions or withdrawals.
The automatic testing of the wiring harnesses allows considerable time savings during the production process. Automation reduces dependence on manual controls, allowing workers to focus on more creative and strategic tasks.
Faulty or faulty connections can cause short circuits, overheating and potential hazards to operators. Automatic verification helps to reduce these risks, protecting both the products and the personnel involved.
The ability of the MY CABLE TESTER 24-24 to detect and solve problems right from the production stage significantly reduces the need for costly after-sales service requests, boosting business reputation and optimizing resource utilization.
The adoption of automatic wiring testing using innovative tools such as the MY CABLE TESTER 24-24 represents a decisive step towards a more efficient and reliable future in the electronics industry. The ability to identify and solve problems in real time during the production process guarantees a higher level of product quality and reduces the costs associated with manufacturing defects.
In conclusion, the automatic testing of cabling stands as an essential pillar for the innovation and development of companies active in the electronics and cabling sector such as - just to name a few - companies operating in the automation sector, automotive sector, home automation sector, audio sector, etc. The introduction of the MY CABLE TESTER 24-24 provides an unprecedented, low-cost opportunity to increase reliability, reduce production costs and meet growing customer needs. Investing in automated testing technologies means investing in the company’s quality, efficiency and long-term success.